PRODUCT

OTG Technical Scuba Diving Aluminum Backplate is an idea for technical divers who want to DIY their harness system or replacement.

OTG Technical Scuba Diving Inline Second Stage Regulator Adjustment Tool is used for fine tuning 2nd stages regulator. The tool has a built-in pressure gauge which allows the intermediate pressure (IP) of the first stage to be checked and adjusted if necessary. Then connect the tool inline between the 2nd stage regulator and the LP hose, allowing adjustments while the hose is pressurized. The flat slot drive of the tool will be inserted in to the 2nd stage to allow the orifice to be turned to find exactly the proper adjustment for the 2nd stage air inlet. It's fit for most modern designs 2nd stage regulator which is adjust by flat slot drive.

OTG Scuba Diving BCD Over Pressure Relief Dump Valve complete assembly set is fit for most Standard Wings, BCD, Lift bag and SMB OPV. It is a generic replacement and divers should keep a spare while your diving trip.

The OTG Technical Scuba Diving Jon Line is idea for divers to maintain a certain depth when ascent lines are crowded with other divers or when the current is ripping for decompression or safety stops. Also, our jon line allows multiple divers to stay at the same depth on one line, and keeps you from being pulled up and down by a pitching and rolling boat in rough seas. Our Jon Line easily clips onto an anchor line or down line and is also easy to remove. Stored inside a small, dispenser pouch is our 225cm long 1-inch nylon webbing and with a 304 marine-grade, stainless steel garvin hook. The pouch will slide easily onto any standard 2-inch webbing.

OTG Technical Scuba Diving Quick Release Chest Strap is an idea to keep the BCD top closed and held in a comfortable position. The chest strap is 1” webbing with adjustable loop through on each side. It includes a quick release buckle and has a new easy install design. This enables divers no need to uninstall the harness or shoulder strap of the BCD before setup the chest strap. The approx. total length of the chest strap is up to 22 inches (please check the size details from our product photo.) It is long enough to fit most of the BCD and Harness system. Also, the length of chest strap can be cut by oneself in order to fit all divers. If you are looking for the chest strap for your BCD / Harness system, this strap will make your diving more comfortable.

OTG Scuba Diving Neoprene Storage Pouch is an excellent storage pouch have the best protection function for your accessories such as Computers, GoPro, Camera, Compass, spools, reels, service kits, tools or any spare item you may need, fit nicely into this neoprene pouch. The pouch size is 8.5 inch tall and 11 inch wide.

OTG Technical Scuba Diving Line Cutter is sharper than a standard dive knife and uses a marine grade stainless steel blade that can easily cut thru braided line, monofilament or any other line entanglement. The blade is easily removed for cleaning and replacement. The line cutter fits into a 3-1/2" x 2-3/8" nylon sheath and secured by velcro sheath. It is easy to mounts onto any 2" webbing or the waistband of the harness for easy to reach.

OTG Technical Scuba Diving All Sealed Surface Marker Buoy (SMB) - Nowadays, the Safety Sausage / Signal tube is a must-have accessory for every open ocean diver. Fully closed (All Sealed), the Safety Signal Tube fits easily in a pocket or can be secured to a harness D-ring. 45" long is easy to inflate with the Dual (inflate by Oral or inflator low pressure hose) inflation valve under water or on the surface. Now, diver can shooting the all sealed signal tube even at depth, the over pressure valve (OPV) allows excess gas to vent during ascent and/or to deflate the bag.

The OTG Scuba Diving Mini Size Compact Multi Tool features stainless steel tools within a very compact metal housing. This is a premium quality tool that includes eight of the most commonly needed Scuba repair tools, including a variety of hex keys, screwdrivers, a brass o-ring pick, and even a Schrader valve tool.