PRODUCT

OTG Scuba Diving Female 9/16"-18 to Male 3/8"-24 Adapter is to allow divers to connect a LP first stage port to a LP second stage fitting. Essentially performing the same function as a standard LP regulator hose, but without the hose. This adapter is made by marine chrome plated brass and is 40% Nitrox ready. The working pressure is below 200psi and is for low pressure use only.

OTG Techincal Scuba Diving 84 inch (length) Low Pressure Double Braided Regulator Hose is for technical divers who are looking for a high quality LP hose for their (7 feet) long hose regulator setting. The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is 9/16 inch for standard second stage regulator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.

OTG Techincal Scuba Diving 30 inch (length) Low Pressure Double Braided Inflator Hose is for divers who are looking for a high quality inflator hose for their dry suit inflator system. The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is converted to any standard BCD inflator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.

OTG Scuba Diving Female 3/8"-24 to Male 1/4" NPT Adapter is for divers to change the first stage end of a regulator hose to 1/4" NPT male threads. This adapter is made by marine chrome plated brass. The working pressure is below 200psi and is for low pressure use only.

OTG Scuba Diving Pony Bottle Pressure Gauge to High Pressure Hose Adapter is for divers to attach their mini SPG to a standard high pressure hose. The 7/16 inch female end screws into a mini SPG, and the other end of the adapter is to connect to a standard high pressure hose with an airspool. It's also great for use with air integrated transmitters. This adapter is made by marine chrome plated brass and is completed 40% Nitrox ready. Price is included 1pc. x airspool with Viton o-ring.

OTG Tech Scuba Diving 316 Stainless Steel 70mm(L) Swivel Eye Bolt Snap is commonly used with regulators, smaller back-up lights or any accessories that being attached to a BC or harness for stowing. Use this one to setup your long hose primary second stage.

All of our Premium Stainless Steel snaps are made by heavy-duty 316 stainless steel alloy which suitable for marine applications. For long life and ease-of-use, the interior spring is also made of stainless steel alloy. Tips for storage: Please rinse your bolt snap in fresh water after each dive.

OTG Scuba Diving Sidemount Stainless Steel Sliding D-Ring is an idea for diver to hold the 12L steel cylinders in place or adjust the perfect trim of AL80 cylinders from the start of dive to the end even the buoyant become positive. This D-Ring can be easily adjusted during the dive. This D-Ring is made by 304 marine grade stainless steel and fit for any standard 2-inch harness. The size is approx. 66mm(L) x 41mm(H) x 3mm(thickness).

****Please check the following details before purchase: Because of the friction between the bungee and harness, divers must check the bungee often and exchange a new one when damaged.****

OTG Scuba Diving Offset Stainless Steel Rigid D-Ring is for divers to attach to any 2-inch standard webbing of the shoulder harness and extend out from behind rebreather counterlungs for easier attachmnet of bailout bottles. It is also an ideal for sidemount divers to attaching tank bungees. This D-Ring is made by 304 marine grade stainless steel and fit for any standard 2-inch webbing / harness. The size is approx. 97mm(L) x 39mm(W).

OTG Scuba Diving Reel / Spool Stainless Steel Line Swivel is for divers to install to their reel or spool in order to prevent line entanglement and twisting. This line swivel is made by 316 marine grade stainless steel. Its size is approx. 23mm(L) x 6mm(dia.) The size of hole on both side is approx. 3mm(dia.).