PRODUCT

OTG Techincal Scuba Diving 84 inch (length) Low Pressure Double Braided Regulator Hose is for technical divers who are looking for a high quality LP hose for their (7 feet) long hose regulator setting. The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is 9/16 inch for standard second stage regulator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.

OTG Technical Scuba Diving 1.25 inch long Stainless Steel Bolts Wing Nuts Kit is for divers who are looking for a replacement of 5/16"-18 x 1.25" bolts kit for their STA or just want to keep a pair in their save-a-dive kit. Our Stainless Steel Bolts Kit are made of heavy-dut 316 marine grade stainless steel. This bolts kit also come with plastic lock washers which is easier to keep the bolts in place while setup the gear.

OTG Scuba Diving Digital Differential Pressure Gauge is for divers to check and setup the cracking effort (inhalation effort) of the 2nd stages regulator. The measure range is from -55.40 inH2O to +55.40 inH2O and the resolution is 0.01 inH2O. Also, this gauge have totally 11 units which can be select such as inH2O, psi, bar, mbar, kpa, inHg, mmhg, ozin, ftH2O, cmH2O etc... It is an easy operation and clear reading gauge for every technician.

OTG Technical Scuba Diving 300 Bar Din Conversion Kit allow you to change your Yoke style first stage regulator to 300 Bar Din style. Our conversion kit is fit for standard Yoke style first stage regulator which is using the thread size 5/8"-24-UNF. Our conversion kit is made of marine grade chrome plated brass completed with O-ring and filter. Easy to install and EAN 40% ready.

OTG Scuba Diving Male 9/16"-18 to Female 3/8"-24 Adapter allows two low pressure regulator hoses to be joined together. This adapter is made by Marine Chrome Plated Brass and 40% Nitrox ready. The working pressure is below 200psi and for low pressure use only.

OTG Scuba Diving Male 3/8"-24 to Female 1/2"-20 Adapter enables divers to connect a 1/2" male end low pressure hose to any dive regulator that has 3/8" female ports. This adapter is made by Marine Chrome Plated Brass, come with Viton O-ring and is completed 40% Nitrox ready. The working pressure is below 200psi and for low pressure use only.

OTG Scuba Diving Male 1/2"-20 to Female 3/8"-24 Adapter - for those regulators that have 1/2" female ports, now you can use this adapter to connect any hose with 3/8" male fitting. This adapter is made by Marine Chrome Plated Brass, come with Viton O-ring and is completed 40% Nitrox ready. The working pressure is below 200psi and for low pressure use only.

OTG Scuba Diving Male 3/8"-24 to Female 7/16"-20 Adapter allows divers to connect a 7/16" male high pressure hose to a first stage regulator with 3/8" female ports. This adapter is made by Marine Chrom Plated Brass, come with Viton O-ring and is completed 40% Nitrox ready.

OTG Scuba Diving Male 7/16"-20 to Female 3/8"-24 Adapter is for divers to connect a 3/8" high pressure hose to a 7/16" high pressure first stage regulator port. This adapter is made by Marine Chrom Plated Brass, come with Viton O-ring and is completed 40% Nitrox ready.