PRODUCT

OTG Scuba Diving High Pressure Seat Extractor Tool can be used for extracting and installing the high pressure seats in first stage regulator. It can also be used to push out the soft seat located inside the piston of unbalanced piston first stage. The overall length (included the shaft) of this tool is 140mm and the length of the shaft is 40mm.

OTG Scuba Diving Male 3/8"-24 to Male 9/16"-18 Adapter allows divers to convert first stage thread to second stage thread. Let you easy to customize your scuba gear. This adapter is made by Marine Chrome Plated Brass, come with Viton O-ring and is completed 40% Nitrox ready. The working pressure is below 200psi and for low pressure use only.

OTG Scuba Diving Male 9/16"-18 to Male 9/16"-18 Adapter allows divers to join two low pressure hose at the second stage fitting. This adapter is made by Marine Chrome Plated Brass and is completed 40% Nitrox ready.

OTG Scuba Diving BCD Hose Schrader Valve Stem is for divers to replace their BC inflator hose schrader valve stem. Keep one with you and it is a Save-A-Dive kit.

OTG Scuba Diving Standard Inflator Hose Gripper fits onto the quick disconnect end of your BCD or drysuit standard inflator hose to make it much more easy to connect or disconnect the inflator hose even when wearing thick gloves. It is fit for most standard quick disconnect hose ends.

OTG Technical Scuba Diving Elastic Hose Retainer is an excellent accessory to keep your bailout, stage bottle or deco bottle hoses tuck away when not in use. Our Elastic Hose Retainer is made by 2" wide anti-slip elastic band and the large size is fit for 80 cu ft cylinders which is 7.25 inch diameter. Also, these hose retainers have a sewn webbing loop for easy grip, even with gloves.

OTG Scuba Diving Male 3/8"-24 to Standard BC Female Adapter is to allow divers to convert their scuba gear. The 3/8-inch male end screws into the second stage LP port or any 3/8-inch female end. The other end of this adapter is a quick disconnect BD female fitting that accepts the standard BC inflator male QD port. This adapter is made by marine chrome plated brass. It comes with Viton O-Ring and is completed 40% Nitrox ready.

OTG Scuba Diving Female 3/8"-24 to Female 3/8"-24 Adapter is to allow divers to convert their scuba gear. This adapter is made by marine chrome plated brass.

OTG Scuba Diving Female 9/16"-18 to Male 3/8"-24 Adapter is to allow divers to connect a LP first stage port to a LP second stage fitting. Essentially performing the same function as a standard LP regulator hose, but without the hose. This adapter is made by marine chrome plated brass and is 40% Nitrox ready. The working pressure is below 200psi and is for low pressure use only.