PRODUCT

OTG Scuba Diving Standard Inflator Hose Gripper fits onto the quick disconnect end of your BCD or drysuit standard inflator hose to make it much more easy to connect or disconnect the inflator hose even when wearing thick gloves. It is fit for most standard quick disconnect hose ends.

OTG Scuba Diving BCD Hose Schrader Valve Stem is for divers to replace their BC inflator hose schrader valve stem. Keep one with you and it is a Save-A-Dive kit.

OTG Scuba Diving Male 9/16"-18 to Male 9/16"-18 Adapter allows divers to join two low pressure hose at the second stage fitting. This adapter is made by Marine Chrome Plated Brass and is completed 40% Nitrox ready.

OTG Scuba Diving Male 3/8"-24 to Male 9/16"-18 Adapter allows divers to convert first stage thread to second stage thread. Let you easy to customize your scuba gear. This adapter is made by Marine Chrome Plated Brass, come with Viton O-ring and is completed 40% Nitrox ready. The working pressure is below 200psi and for low pressure use only.

OTG Scuba Diving High Pressure Seat Extractor Tool can be used for extracting and installing the high pressure seats in first stage regulator. It can also be used to push out the soft seat located inside the piston of unbalanced piston first stage. The overall length (included the shaft) of this tool is 140mm and the length of the shaft is 40mm.

OTG Scuba Diving Tire Inflator can be connected to your standard BC inflator hose and let you pump things up using your first stage regulator and the air in your scuba tank. With this tire inflator, you can inflate tires, or anything else with a schrader valve stem. No-leak washers provide a secure fit to the stem and the end is offset to help manage the hose during inflation. This tire inflator is made by Marine Chrome Plated Brass for corrosion resistant use.

OTG Scuba Diving Male 7/16"-20 to Female 3/8"-24 Adapter is for divers to connect a 3/8" high pressure hose to a 7/16" high pressure first stage regulator port. This adapter is made by Marine Chrom Plated Brass, come with Viton O-ring and is completed 40% Nitrox ready.

OTG Scuba Diving Male 3/8"-24 to Female 7/16"-20 Adapter allows divers to connect a 7/16" male high pressure hose to a first stage regulator with 3/8" female ports. This adapter is made by Marine Chrom Plated Brass, come with Viton O-ring and is completed 40% Nitrox ready.

OTG Scuba Diving Male 1/2"-20 to Female 3/8"-24 Adapter - for those regulators that have 1/2" female ports, now you can use this adapter to connect any hose with 3/8" male fitting. This adapter is made by Marine Chrome Plated Brass, come with Viton O-ring and is completed 40% Nitrox ready. The working pressure is below 200psi and for low pressure use only.