PRODUCT

OTG Scuba Diving Male 9/16"-18 to Female 3/8"-24 Adapter allows two low pressure regulator hoses to be joined together. This adapter is made by Marine Chrome Plated Brass and 40% Nitrox ready. The working pressure is below 200psi and for low pressure use only.

OTG Technical Scuba Diving 300 Bar Din Conversion Kit allow you to change your Yoke style first stage regulator to 300 Bar Din style. Our conversion kit is fit for standard Yoke style first stage regulator which is using the thread size 5/8"-24-UNF. Our conversion kit is made of marine grade chrome plated brass completed with O-ring and filter. Easy to install and EAN 40% ready.

OTG Scuba Diving Digital Differential Pressure Gauge is for divers to check and setup the cracking effort (inhalation effort) of the 2nd stages regulator. The measure range is from -55.40 inH2O to +55.40 inH2O and the resolution is 0.01 inH2O. Also, this gauge have totally 11 units which can be select such as inH2O, psi, bar, mbar, kpa, inHg, mmhg, ozin, ftH2O, cmH2O etc... It is an easy operation and clear reading gauge for every technician.

OTG Technical Scuba Diving 1.25 inch long Stainless Steel Bolts Wing Nuts Kit is for divers who are looking for a replacement of 5/16"-18 x 1.25" bolts kit for their STA or just want to keep a pair in their save-a-dive kit. Our Stainless Steel Bolts Kit are made of heavy-dut 316 marine grade stainless steel. This bolts kit also come with plastic lock washers which is easier to keep the bolts in place while setup the gear.

OTG Scuba Diving Male 3/8"-24 to Standard BC Female Adapter is to allow divers to convert their scuba gear. The 3/8-inch male end screws into the second stage LP port or any 3/8-inch female end. The other end of this adapter is a quick disconnect BD female fitting that accepts the standard BC inflator male QD port. This adapter is made by marine chrome plated brass. It comes with Viton O-Ring and is completed 40% Nitrox ready.

OTG Scuba Diving Female 3/8"-24 to Female 3/8"-24 Adapter is to allow divers to convert their scuba gear. This adapter is made by marine chrome plated brass.

OTG Scuba Diving Anti Slip Design Trim Weight Pocket can be mounted to any standard (2 inch | 5.1 cm) webbing waist belt or harness system. It holds up to 2 kgs of solid / hard or shot / soft weight. Also, it is ideal for divers who add weight to tanks for trim purpose. The velcro closure and buckle closure keeps the pocket flap closed more securely. The anti slip design used a stainless steel belt slide to keep the weight pocket in position.

OTG Scuba Diving Safety Whistle is a small, durable and reliable product enables divers to get the quick and effective attention of the crew on boat, your buddy, or another divers even there have a distance between them. It is a must-have accessory for every divers.

OTG Scuba Diving Replacement Continuous Harness Webbing with Grommet is made by real marine grade, sturdy and stiff webbing. This Harness with nickel plated grommet installed approx. centered on the length of webbing. But please note that the grommet is not centralized on the width of webbing, the position is approx. 1/3 and 2/3 on the width of webbing. Regarding the position of the grommet, please check our products photos accordingly. The size of this webbing is approx. 2 inch (w) x 3.5 meter (L). This enables divers to setup their harness and custom cut the length by oneself, in order to fit their own requests.