PRODUCT

OTG Scuba Diving Power Inflator Service Tool has three openings which allow divers to service their power inflator much more easier. This tool fits for the power inflator which found on most Technical BC wings. It's also included the handwheel nut driver used to service the scuba tank valves. Please note that this service tool is not work for Scubapro, Aqualung, Mares, Cressi inflator etc... Please check the size details from our product photos in order to compare with your power inflator.

OTG Scuba Diving 304 Stainless Steel 2 inch Low Profile D-Ring is commonly used to set-up the harness especially for the side mount system. Our low profile D-ring are made of heavy duty 304 stainless steel which is suitable for marine application. The wire diameter of the D-ring is approx. 4.5mm and the interior height is 25mm. It is fit for any standard 2" harness webbing. For long life and ease-of-use.

OTG Techincal Scuba Diving Inflator Assembly System come with 16"(L) Round shape corrugated hose, K-shape power inflator and plain elbow (non-exhaust elbow). This inflator system is made of durable impact resistant plastic and rubber corrugated hose. The internal components of the power inflator and inlet quick-disconnect nipple are made from marine chrome plated brass. Our inflator assembly is fit for the technical wings (air cells) which using the thread size (inner diameter) of elbow collar is 46mm. But please note that it is not compatible with Scubapro, SeaQuest, etc... So, please check the size detail from our product photos and compare the diameter of the thread size of the bladder flange / elbow of your wings (air cells) accordingly.

OTG Scuba Diving First Stage Regulator Cup Pin Spanner Wrench Service Tool is commonly used for the removal and installation of the high pressure seat retainer on the first stage regulator. This cup wrench tool is adjustable and the adjust range is up to 58mm between pin to pin. The pin size of this tool is 2.75mm and the total length of the tool is approx. 6.25 inches.

OTG Techincal Scuba Diving Oval Inflator Assembly System come with 16"(L) Oval shape corrugated hose, K-shape power inflator and plain elbow (non-exhaust elbow). This inflator system is made of durable impact resistant plastic and rubber corrugated hose. The internal components of the power inflator and inlet quick-disconnect nipple are made from marine chrome plated brass. Our inflator assembly is fit for the technical wings (air cells) which using the thread size (inner diameter) of elbow collar is 46mm. But please note that it is not compatible with Scubapro, SeaQuest, etc... So, please check the size detail from our product photos and compare the diameter of the thread size of the bladder flange / elbow of your wings (air cells) accordingly.

OTG Scuba Diving 304 Stainless Steel 2 inch Bent D-Ring is commonly used to setup the harness or crotch strap system. Our bent D-ring are made of heavy duty 304 stainless steel which is suitable for marine application. The wire diameter of the D-ring is approx. 6mm and fits for any standard 2" harness webbing. For long life and ease-of-use.

OTG Scuba Diving First Stage Regulator Holder Handle Bar has both 3/8"-24 and 7/16"-20 male threaded end to allow threading into the LP or HP ports of the first stage regulator body. It is much more easy and stable to hold your first stage while servicing.

OTG Scuba Diving Stainless Steel Blunt Tip Dive Knife is a must have accessories for all of the scuba divers. The 420 grade stainless steel blade is easy for maintenance. Our dive knife comes with 1pc. plastic sheath. It is easy to install to the BCD or just keep it in the pocket.

OTG Scuba Diving 3/8"-24 Female to Standard BC Inflator Quick Connector Adapter (also known as BC hose quick disconnect adapter) is commonly used to setup the low pressure / BC hose quick disconnect system. Especially for the side mount diving, divers can use this adapter to setup their stremline inflator hose system with one short + one longer BC inflator hose. This is much more easier for the BC inflator hose management system when side mount diving.