PRODUCT

OTG Scuba Diving Stainless Steel Blunt Tip Dive Knife is a must have accessories for all of the scuba divers. The 420 grade stainless steel blade is easy for maintenance. Our dive knife comes with 1pc. plastic sheath. It is easy to install to the BCD or just keep it in the pocket.

OTG Scuba Diving First Stage Regulator Holder Handle Bar has both 3/8"-24 and 7/16"-20 male threaded end to allow threading into the LP or HP ports of the first stage regulator body. It is much more easy and stable to hold your first stage while servicing.

OTG Scuba Diving 304 Stainless Steel 2 inch Bent D-Ring is commonly used to setup the harness or crotch strap system. Our bent D-ring are made of heavy duty 304 stainless steel which is suitable for marine application. The wire diameter of the D-ring is approx. 6mm and fits for any standard 2" harness webbing. For long life and ease-of-use.

OTG Techincal Scuba Diving Oval Inflator Assembly System come with 16"(L) Oval shape corrugated hose, K-shape power inflator and plain elbow (non-exhaust elbow). This inflator system is made of durable impact resistant plastic and rubber corrugated hose. The internal components of the power inflator and inlet quick-disconnect nipple are made from marine chrome plated brass. Our inflator assembly is fit for the technical wings (air cells) which using the thread size (inner diameter) of elbow collar is 46mm. But please note that it is not compatible with Scubapro, SeaQuest, etc... So, please check the size detail from our product photos and compare the diameter of the thread size of the bladder flange / elbow of your wings (air cells) accordingly.

OTG Scuba Diving First Stage Regulator Cup Pin Spanner Wrench Service Tool is commonly used for the removal and installation of the high pressure seat retainer on the first stage regulator. This cup wrench tool is adjustable and the adjust range is up to 58mm between pin to pin. The pin size of this tool is 2.75mm and the total length of the tool is approx. 6.25 inches.

OTG Techincal Scuba Diving Inflator Assembly System come with 16"(L) Round shape corrugated hose, K-shape power inflator and plain elbow (non-exhaust elbow). This inflator system is made of durable impact resistant plastic and rubber corrugated hose. The internal components of the power inflator and inlet quick-disconnect nipple are made from marine chrome plated brass. Our inflator assembly is fit for the technical wings (air cells) which using the thread size (inner diameter) of elbow collar is 46mm. But please note that it is not compatible with Scubapro, SeaQuest, etc... So, please check the size detail from our product photos and compare the diameter of the thread size of the bladder flange / elbow of your wings (air cells) accordingly.

OTG Scuba Diving Air Nozzle is for divers to blow dry their equipments just like air gun or to inflate their marking buoys or other beach toys. Normally the air nozzle is closed, just simply depress the side of the rubber head to release the compressed air from the scuba tank. This air nozzle is made by marine chrome plated brass and durable rubber. It is easy to use and connect to standard inflator hose.

OTG Scuba Diving BCD Inflator Standard Male to Scubapro Air 2 Female Adapter allow divers to use their Standard inflator hose connect to the Scubapro Air 2 nipple. It is a really convenience adapter for divers who want to bring their regulator with them but not with BCD during travel. This adapter is made by durable marine chrome plated brass and is completed 40% Nitrox ready.

OTG Scuba Diving 66 feet Finger Spool with Handle is easier for divers to hold, release or withdraw the line especially when you wear the glove. Just simply use it like the reel but it fits nicely out of the way in pocket. The spool is come with 66 feet orange nylon line and 4" brass double ended bolt snap which is suitable for marine applications.