PRODUCT

OTG Technical Scuba Diving Over Pressure Relief Valve (OPV) to provide a safety pressure relief for your pressure hose especially for your drysuit inflation system. On dedicated drysuit inflation systems there is no regulator second stage to provide relief should the high pressure seat fail. Without a way to relieve the pressure, the drysuit could begin inflating rapidly or the low pressure hose could rupture. The over-pressure relief valve provides the same fail-safe function as a normal regulator second stage. Screws into any available first stage low pressure port and provides protection from first stage failure.

OTG Scuba Diving Neoprene Mask Storage Multi Purpose Pouch Bag is perfect for storing masks. The pouch size is 10 inch tall and 6 inch wide. It’s fit for most multiple brands of masks. Of course, it can also be used to keep and protect your other items such as Dive lights, Camera, service kits, tools or any item you want to keep in this neoprene pouch.

OTG Scuba Diving Night Dive Flashing / Strobe Marker Light  - These high visibility and long lasting flashing marker light is an excellent tool to mark the location of the Anchor, Dec Tank, Ascent Line or Meeting point on low visibility or night dives. Also, it is easier to locate your buddy underwater at night. These light can be used both underwater or on the surface.

OTG Technical Scuba Diving Stainless Steel Belt Slide / Weight Keeper #OG-103 - Stainless Steel belt slides also known as weight retainers and weight keepers. Divers use this slide to setup their Harness system.

OTG Technical Scuba Diving Low Pressure Hose Splitter provides the ability to split a single low pressure supply line to service two devices such as BC, drysuit, and second stage regulator.

OTG Scuba Diving High Pressure T End Air Spool with two tiny o-rings to mate the swivel connector on the high pressure hose to the fitting on the SPG gauge. We recommend replacing the air spool when replacing the hose or keep one spare with you while your diving trip.

OTG Scuba Diving 3 piece Brass O-Ring Pick Set Tool - This three piece brass o-ring pick set is specifically designed for removal and placement of o-rings. The brass tips won't scratch soft seating surfaces in valves, regulators underwater camera / video case or other equipment. The color coded plastic handles have a comfortable ridged grip. Two of the tools have a sharp point and work well for removal, the third has a tiny ball on the end and is nice for placement.

OTG Intermediate Pressure Gauge is for diver to diagnose problems of the 1st stage Regulator. It's often very helpful to know if the IP (Intermediate Pressure) is out-of-range. Just plugs the Gauge into any standard BC low pressure inflator hose, it is easy to use. Most of the modern scuba 1st stage regulator should have an intermediate pressure of about 130 to 142 psi.

OTG Scuba Diving Compass Module for operation to depths of 80m / 260 Feet. It features a rotating 360-degree bezel with click stops and both direct and reciprocal index points. Large, easy-to-read numbers are displayed on the face and in the side window.