PRODUCT

OTG Scuba Diving Second Stage Regulator to Scubapro BC Inflator Hose Quick Disconnect Adapter allows you to turn your second stage regulator into a quick disconnect device. Nowadays it is commonly to use with second stage or full face mask system. Just simply install the female end to any standard second stage regulator with 9/16"-18 UNF threads. And the nipple end is fit to connect to Scubapro BC quick disconnect adapter. This adapter is made by Marine Chrome Plated Brass and is completed 40% Nitrox ready. The working pressure is below 200psi and is for low pressure use only.

OTG Scuba Diving 2" wide Nylon Weight Belt with Plastic Buckle is made by real marine grade, sturdy and stiff webbing. It comes with 2 slot durable plastic belt buckle. The size of this weight belt is approx. 2"(W) x 59"(L). Divers can custom cut the length by oneself, in order to fit their own request.

OTG Scuba Diving Safety Whistle with Mini Compass is a small, durable and reliable product which enable divers to get quick and effective attention of the crew on boat, your buddy, or another divers even there have a distance between them. The mini compass also allow divers to identify the general direction underwater or on the surface. It is a must-have accessory for every divers.

OTG Scuba Diving 304 Stainless Steel 2 inch Low Profile D-Ring is commonly used to set-up the harness especially for the side mount system. Our low profile D-ring are made of heavy duty 304 stainless steel which is suitable for marine application. The wire diameter of the D-ring is approx. 4.5mm and the interior height is 25mm. It is fit for any standard 2" harness webbing. For long life and ease-of-use.

OTG Scuba Diving Power Inflator Service Tool has three openings which allow divers to service their power inflator much more easier. This tool fits for the power inflator which found on most Technical BC wings. It's also included the handwheel nut driver used to service the scuba tank valves. Please note that this service tool is not work for Scubapro, Aqualung, Mares, Cressi inflator etc... Please check the size details from our product photos in order to compare with your power inflator.

OTG Scuba Diving Neoprene Pressure Gauge Protection Pouch is an idea to protect your pressure gauge during travel or transport your gear from point to point after setting. This pouch can fit pressure gauge up to 6cm diameter.

OTG Scuba Diving Hoses Clip is for all of the diver want to keep their octopus in the right place and avoid the octopus drag along the coral or bottom. Also, divers can keeps their second stages and octopus securely in place when not needed.

OTG Scuba Diving 1/4" NPT Male to Scubapro BC Inflator Quick Connector Adapter are used by most compressed air powered tools. With this adapter, you can power all sorts of air tools by scuba tank using first stage regulator and BC inflator hose.

The OTG Technical Scuba Diving Delrin Threaded Dust Plug is ideal to protect the Din Valve of Tank.