PRODUCT

OTG Scuba Diving Foldable Mesh Duffle Gear Bag is made by durable nylon mesh and coated nylon material. It's an excellent roomy and strong enough gear bag with fast drainage. The size of this duffel bag is approx. 72cm(L) x 35cm(W) x 37cm(H). It has enough room for your whole set gear such as BC, regulator, wetsuit etc… Or simply used for a snorkel set (wetsuit, fins and mask). This bag can be folded into its own front pocket and the folded size is approx. 22cm(L) x 7.5cm(W) x 15.5cm(H) . It is really convenience during travel - divers can pack this foldable bag into their baggage and use this bag to bring their diving / snorkeling gear to the dive center, dive boat or any dive site. This bag is easy for maintenance, just simply immerse the entire bag in fresh water, then allow it to fully dry with good air circulation (away from direct sunlight) before storing or packing.

OTG Technical Scuba Diving Standard Power Inflator fits the 1-inch diameter corrugated rubber hose which found on most tek BC aircells.

OTG Technical Scuba Sidemount Diving Neck Clip Chocker makes clipping the cylinder easier and causes it to lay tighter against your body, reducing dangling and drag. The choker pulls the neck clip tight up against the valve and holds it in a consistent position, perfect clipping sidemount cylinders. The choker goes around the valve and thru the gate to hold it up tight against the neck on the curve if the cylinder so the gate of the clip lays up against the neck of the cylinder.

OTG Technical Scuba Diving Lift Bag Sleeve gives divers the option to wear the sleeve on the backplate or stage tank. The Sleeve can attach to a stage tank using a Standard 2 inch tank band or Metal Clamps. Diver can also use the assembly screws to attach the sleeve to their backplate. The front side of the sleeve is heavy duty plastic mesh and the back side is 1200D heavy duty nylon. The velcro closure keeps items secure inside until ready to deploy. The sleeve size is 5.5 inch tall (not included the heading) x 11 inch wide with gusset. It can be fit for most of surface markers and lift devices.

OTG Scuba Diving 316 Stainless Steel 4.5 inch Double Ended Bolt Snap

OTG Technical Scuba Diving Deluxe Adjustable System Shoulder Pad will protect your exposure suit and provide more comfortable experience when diving. Our shoulder pad is easy setup to your harness system within a minute and no need to uninstall the webbing before setting. Also, this shoulder pad is adjustable. It will fit around shoulder D-Ring and any harness accessories. It is a convenience and comfort shoulder pad for all scuba divers.

OTG Scuba Diving low pressure hose to Scubapro Air 2 quick disconnect adapter (converter)

OTG Scuba Diving Deluxe Retractor can keep your accessories such as compass, gopro, camera, video, lights or other equipment more safety while diving. Use the Heavy Duty Plastic Swivel Snap to attach on your BCD and the other side attach your gear. Also, our deluxe retractor have a new locking function, just simply push a button, divers can lock or free the retractor anytime. It is a really convenient function for photograph or etc...

OTG Scuba Diving Standard BCD Wash Hose is for diver to wash the inside of their Buoyancy Compensator to remove the build up of salt crystals and foreign deposits much more easier. This wash hose is fit for the inflator with standard male QD nipple. Just connect the BCD inflator QD nipple to the garden hose and fill about half way with fresh water to fully rinse inside. Then give the BC a good shaking. Invert the BC, drain the water and debris out by depressing the oral inflator button. Please make sure to inflate the BCD and allow to dry before storing. It is a much more easier way to clean up the BCD.