PRODUCT

OTG Technical Scuba Diving 50 LBS Lift Bag is perfect for salvage projects or even better for use as a marking buoy for decompression or safety stops in the open water. The lift capacity of this bag is (50 lbs / 23kgs) and has a handle at the top and reflective tape on both sides. The open bottom one-way valve design will allow excess air to vent in the case of an uncontrolled ascent but prevent air loss at the surface. Made of durable nylon material in a high visibility Orange color. The Over Pressure Valve (OPV) is located at the top of the bag to rapidly remove air when needed but also serves to eliminate accidental over-inflation during ascent from expansion. It is a must-have accessory for every open ocean diver.

OTG Technical Scuba Diving Stainless Steel Single Tank Adapter with 2 Stainless Steel Buckle Tank Bands - Ideal for divers switch their harness system between double tank and single tank rigs or between backmount and sidemount configurations.

OTG Heavy Duty BCD and Regulator Hanger is especially design to hang your BCD and Din or Yoke regulator. It's made of sturdy Plastic material and strong enough to support the weight of your wet BCD and regulator together. The hook / wing design on both end is to prevent your BCD from sliding off and keep your BCD more secure. This hanger comes with the din thread and attachment point which can hold your Din or Yoke regulator. It's a good item to hold your BCD and regulator during drying and storage.

OTG Heavy Duty BCD and Regulator Hanger is especially design to hang your BCD and Din or Yoke regulator. It's made of sturdy Plastic material and strong enough to support the weight of your wet BCD and regulator together. The hook / wing design on both end is to prevent your BCD from sliding off and keep your BCD more secure. This hanger comes with the din thread and attachment point which can hold your Din or Yoke regulator. It's a good item to hold your BCD and regulator during drying and storage.

OTG Scuba Diving Tank Banger is a simple, reliable and long lasting tool for diver who would like to get a quick and effective attention of your buddy, student or communication with another divers. Just install the Banger stretch over the scuba tank near the bottom. This banger fit for most standard scuba tank and easy to install. It is a must-have accessory for every divers.

OTG Scuba Diving Tank Banger is a simple, reliable and long lasting tool for diver who would like to get a quick and effective attention of your buddy, student or communication with another divers. Just install the Banger stretch over the scuba tank near the bottom. This banger fit for most standard scuba tank and easy to install. It is a must-have accessory for every divers.

OTG Technical Scuba Diving Backplate Harness Adjustable Slider is design for divers who would like to use a 1-piece harness but still want their harness adjustable. This adjustable slider have a raised and rounded aluminum bar on center that allows the harness / webbing to slide more easily when adjustment. It's made of aluminum and 304 stainless steel. It is a simply and long lasting tool for every diver.

OTG Scuba Diving Deluxe Surface Marker Buoy (SMB) with Sling Pouch - Nowadays, the Safety Sausage Signal Tube / SMB is a must-have accessory for every open ocean diver. OTG Deluxe Surface Marker Buoy is open at the bottom as with the lift bag and incorporates an ingenious funnel-shaped internal baffle (Duck Bill) that allows the tube to be inflated as usual with a regulator second stage at depth but prevents the tube from unintentionally deflating should it fall over while on the surface. Diver can shooting this SMB at depth as the 2 inch over pressure valve (OPV) allows excess gas to vent during ascent and/or to deflate the bag on boat. Also, this marker have a Dual Inflation Valve, it is easy to inflate by Oral or inflator low pressure hose. There have a clear PVC tube on the top in order to put in the light stick while night diving. The price included a sling storage pouch.

OTG Scuba Diving Rubber Ring Style Octopus Holder is an idea to hold your second stages on the right place where you can easy to reach for and are not dragging along the bottom. This simple and reliable OTG rubber ring octopus holder keeps your regulator second stages securely in place when not needed, yet releases them quickly in response when you need. The rubber ring that encircles the second stage mouthpiece does a great job of holding on to the second stage.