PRODUCT
-
US $4.99
OTG Waterproof Smart Phone Pouch is an idea to protect your smart phone away from water, dirt, sand or snow etc... This pouch is touch friendly to ensure the use of screen function and the both sides clear PVC material enables to take the photos. The size of this pouch is approx. 22cm (included the plastic lock) x 10cm wide. It's fit for most smart phone under 6 inches or use this to keep your car key, passport, credit card or anything away from water. This pouch comes with lanyard and adjustable elastic arm strap. It is good for travel trip, fishing, boat trip, hiking, camping or any of your favorite outdoor activity.
This pouch is waterproof and sealed after locked. But we don't suggest our client to use this for scuba diving or snorkeling because your smart phone is thousand times expensive than this pouch. Test Waterproof Function with tissue before every time use and Squeeze all of the air out of case to better use the touch screen.
Learn More -
US $9.49
OTG Scuba Diving BCD Bladder Flange Tool is used to remove and install the bladder flanges on some older BC's. It works with some Dive Rite, OMS, Hollis bladder and OPV flanges.
Learn More -
US $5.49
OTG Scuba Diving Universal Black Silicone Mask Strap is a generic replacement for most brands of scuba diving or snorkeling masks. Keep a spare with you while your diving trip.
Learn More -
US $5.49
OTG Scuba Diving Universal Clear Silicone Mask Strap is a generic replacement for most brands of scuba diving or snorkeling masks. Keep a spare with you while your diving trip.
Learn More -
US $8.39
OTG Technical Scuba Diving Non-Directional Line Cookie Marker for Wreck or Cave Dive - Non-directional line Cookie marker mark a specific place on the line, but do not give directional information. They are preferred over line arrows for setting up traverses or circuits because they avoid the possibility of having directional markers on the line which could point away from the closest exit, which could be disastrous in an emergency. They are a must at jumps, especially jumps made from points at which no permanent marker has been installed. Placed on the outbound side of the jump, they confirm exit direction as divers return to the jump.
Learn More -
US $8.49
OTG Technical Scuba Diving Non-Directional Line Marker for Wreck or Cave Dive - Non-directional line marker mark a specific place on the line, but do not give directional information. They are preferred over line arrows for setting up traverses or circuits because they avoid the possibility of having directional markers on the line which could point away from the closest exit, which could be disastrous in an emergency. They are a must at jumps, especially jumps made from points at which no permanent marker has been installed. Placed on the outbound side of the jump, they confirm exit direction as divers return to the jump. This Rectangle marker is perfect for Diver to write down any information on the surface which they want.
Learn More -
US $66.19
OTG Technical Scuba Diving Din Cylinder Tank Pressure Checker is for the diver to check their tank pressure before the gear set-up. The reading range of this checker is from 0 - 5,000 psi (0 - 350 bars), and the diameter size of the pressure gauge is 2" (not included the rubber boot), it is easy to read. The pressure gauge is covered by rubber boot for much more security and the material of this checker is marine grade chrome plated brass. It has a bleed screw valve for easy to use and come with a Din thread plastic protector cap.
Learn More -
US $7.19
OTG Scuba Diving Second Stage Regulator Quick Disconnect Adapter allows you to turn your second stage regulator into a quick disconnect device. Nowadays it is commonly used with normal second stage or full face mask system. Just simply to install the female end to any standard second stage regulator with 9/16"-18 UNF threads. And the nipple end is fit to connect to any standard BC quick disconnect adapter. This adapter is made by Marine Chrome Plated Brass and is completed 40% Nitrox ready. The working pressure is below 200psi and for low pressure use only.
Learn More -
US $23.99
Out of stock
OTG Technical Scuba Diving Bellows Pocket have enough space to fit SMB, lift bag, safety reel, large finger spool or many other accessories. 2 bungee cord loop inside the main pocket to help secure item. Also there have an internal divider for stowing the dive notepads and the pocket flap with built-in accessory pocket. Two 1.25" wide nylon webbing strips along the back provide a secure fit on any 2" webbing. There are also one 2" wide nylon webbing strip to allow for slide it to 4" cummerbund. The heavy duty velcro closure keeps the pocket flap closed more securely.
Learn More -
US $32.49
OTG Technical Scuba Diving Din To Yoke Cylinder Filling Adapter is for 200 / 300 Bar Din valve to filling with a standard Yoke filler up to 3,000 psi (200 bars). Just bring this adapter with you wherever you go, you can fill your Din cylinder from any dive operator even they only can fill the Yoke valve cylinder.
Learn More