Adapters & Converters

OTG Scuba Diving 360 degree Swivel First Stage Low Pressure Port Adapter 

OTG Scuba Diving 110 degree Swivel Regulator (Second Stage) Adapter

OTG Scuba Diving 90 degree Swivel Regulator (Second Stage) Adapter

OTG Scuba Diving Low Pressure Hose to Seaquest BCD Inflator Quick Disconnect Adapter

OTG Scuba Diving Din to Yoke insert tank valve adapter (converter) 

OTG Scuba Diving 1/4" NPT Male to Scubapro BC Inflator Quick Connector Adapter are used by most compressed air powered tools. With this adapter, you can power all sorts of air tools by scuba tank using first stage regulator and BC inflator hose.

OTG Scuba Diving Din to Yoke Adapter for Din first stage regulator with Dust Cap

OTG Scuba Diving Second Stage Inline Shutoff Valve is a high quality shutoff valve which install just between your second stage regulator and the low pressure hose. This valve is open and close by sliding the collar (On is toward to the second stage). It's easy to operate even when you wear the glove. Nowadays it is commonly used to prevent gas loss or free flow from your second stage or rebreather. Divers also used it with deco rigs, stage bottles, drysuit or BC inflation etc... This valve is made by Marine Chrome Plated Brass and is completed 40% nitrox ready. The working pressure is below 200psi low pressure only and we highly recommend to install the first stage over pressure relief valve when you use this shutoff valve.