BCD & Weight Accessories

OTG Scuba Diving Sidemount Stainless Steel Slideable D-Ring allow divers to adjust the position of the D-Ring whilst under water. Especially for sidemount divers to adjust the perfect trim of their aluminum cylinders from the start of dive to the end even the buoyant become positively. This Slideable D-Ring kit is made by 316 marine grade stainless steel and fit for any standard 2-inch harness. It is a simple but durable parts for every sidemount divers.

OTG Scuba Diving Sidemount Stainless Steel Sliding D-Ring is an idea for diver to hold the 12L steel cylinders in place or adjust the perfect trim of AL80 cylinders from the start of dive to the end even the buoyant become positive. This D-Ring can be easily adjusted during the dive. This D-Ring is made by 304 marine grade stainless steel and fit for any standard 2-inch harness. The size is approx. 66mm(L) x 41mm(H) x 3mm(thickness).

****Please check the following details before purchase: Because of the friction between the bungee and harness, divers must check the bungee often and exchange a new one when damaged.****

OTG Scuba Diving Offset Stainless Steel Rigid D-Ring is for divers to attach to any 2-inch standard webbing of the shoulder harness and extend out from behind rebreather counterlungs for easier attachmnet of bailout bottles. It is also an ideal for sidemount divers to attaching tank bungees. This D-Ring is made by 304 marine grade stainless steel and fit for any standard 2-inch webbing / harness. The size is approx. 97mm(L) x 39mm(W).

OTG Techincal Scuba Diving Oval Inflator Assembly System come with 16"(L) Oval shape corrugated hose, K-shape power inflator and plain elbow (non-exhaust elbow). This inflator system is made of durable impact resistant plastic and rubber corrugated hose. The internal components of the power inflator and inlet quick-disconnect nipple are made from marine chrome plated brass. Our inflator assembly is fit for the technical wings (air cells) which using the thread size (inner diameter) of elbow collar is 46mm. But please note that it is not compatible with Scubapro, SeaQuest, etc... So, please check the size detail from our product photos and compare the diameter of the thread size of the bladder flange / elbow of your wings (air cells) accordingly.

OTG Techincal Scuba Diving Inflator Assembly System come with 16"(L) Round shape corrugated hose, K-shape power inflator and plain elbow (non-exhaust elbow). This inflator system is made of durable impact resistant plastic and rubber corrugated hose. The internal components of the power inflator and inlet quick-disconnect nipple are made from marine chrome plated brass. Our inflator assembly is fit for the technical wings (air cells) which using the thread size (inner diameter) of elbow collar is 46mm. But please note that it is not compatible with Scubapro, SeaQuest, etc... So, please check the size detail from our product photos and compare the diameter of the thread size of the bladder flange / elbow of your wings (air cells) accordingly.

OTG Scuba Diving Standard BCD Wash Hose is for diver to wash the inside of their Buoyancy Compensator to remove the build up of salt crystals and foreign deposits much more easier. This wash hose is fit for the inflator with standard male QD nipple. Just connect the BCD inflator QD nipple to the garden hose and fill about half way with fresh water to fully rinse inside. Then give the BC a good shaking. Invert the BC, drain the water and debris out by depressing the oral inflator button. Please make sure to inflate the BCD and allow to dry before storing. It is a much more easier way to clean up the BCD.

OTG Scuba Diving low pressure hose to Scubapro Air 2 quick disconnect adapter (converter)

OTG Technical Scuba Diving Deluxe Adjustable System Shoulder Pad will protect your exposure suit and provide more comfortable experience when diving. Our shoulder pad is easy setup to your harness system within a minute and no need to uninstall the webbing before setting. Also, this shoulder pad is adjustable. It will fit around shoulder D-Ring and any harness accessories. It is a convenience and comfort shoulder pad for all scuba divers.

OTG Technical Scuba Sidemount Diving Neck Clip Chocker makes clipping the cylinder easier and causes it to lay tighter against your body, reducing dangling and drag. The choker pulls the neck clip tight up against the valve and holds it in a consistent position, perfect clipping sidemount cylinders. The choker goes around the valve and thru the gate to hold it up tight against the neck on the curve if the cylinder so the gate of the clip lays up against the neck of the cylinder.