BCD & Weight Accessories

OTG Scuba Diving Low Pressure Hose to Standard BCD Inflator Easy Grip Quick Disconnect Adapter allows divers to convert any standard LP regulator hose to a low pressure Standard BC easy grip style quick disconnect hose. For the easy grip collar, it works perfectly even wearing thick gloves. This adapter is made by Marine Chrome Plated Brass and is completed 40% Nitrox ready. The working pressure is below 200psi and for low pressure use only.

OTG Scuba Diving Weight Plate With Multi Function Easy Tool is an easy and simply way for divers to install their weight to any 2 inch webbing. Also, there is not need to remove any hardware or accessories (such as weight buckle, cutter, keeper or ring etc...) when you install this plate. This tool also comes with a multi function which can service for most standard HP hose connector, LP hose connector, BC connector and power inflator hose connector. Easy to install and multi function, it is a must-have accessory for travel trip and every divers.

OTG Technical Scuba Diving 1.25 inch long Stainless Steel Bolts Wing Nuts Kit is for divers who are looking for a replacement of 5/16"-18 x 1.25" bolts kit for their STA or just want to keep a pair in their save-a-dive kit. Our Stainless Steel Bolts Kit are made of heavy-dut 316 marine grade stainless steel. This bolts kit also come with plastic lock washers which is easier to keep the bolts in place while setup the gear.

OTG Techincal Scuba Diving 30 inch (length) Low Pressure Double Braided Inflator Hose is for divers who are looking for a high quality inflator hose for their dry suit inflator system. The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is converted to any standard BCD inflator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.

OTG Techincal Scuba Diving 26 inch (length) Low Pressure Double Braided Inflator Hose is for divers who are looking for a high quality inflator hose for their jacket style BCD inflator system. The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is converted to any standard BCD inflator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.

OTG Techincal Scuba Diving 22 inch (length) Low Pressure Double Braided Inflator Hose is for divers who prefer a shorter length for their technical style BC wing inflator system. The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is converted to any standard BCD inflator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.

OTG Techincal Scuba Diving Inflator Assembly System come with 16"(L) Round shape corrugated hose, K-shape power inflator and plain elbow (non-exhaust elbow). This inflator system is made of durable impact resistant plastic and rubber corrugated hose. The internal components of the power inflator and inlet quick-disconnect nipple are made from marine chrome plated brass. Our inflator assembly is fit for the technical wings (air cells) which using the thread size (inner diameter) of elbow collar is 46mm. But please note that it is not compatible with Scubapro, SeaQuest, etc... So, please check the size detail from our product photos and compare the diameter of the thread size of the bladder flange / elbow of your wings (air cells) accordingly.

OTG Technical Scuba Diving 16 inch Oval shape Corrugated Hose is compatible with most standard 1-inch diameter power inflator and elbow. This Oval Corrugated Hose is made by durable rubber and is approx. 16" long. The length is for the corrugated hose including the hose cuffs (please check the size from our product photos).

OTG Scuba Diving Offset Stainless Steel Rigid D-Ring is for divers to attach to any 2-inch standard webbing of the shoulder harness and extend out from behind rebreather counterlungs for easier attachment of bailout bottles. It is also an idea for sidemount divers to attaching tank bungees. This Double Offset D-Ring is made by 304 marine grade stainless steel and fit for any standard 2-inch webbing or harness.