BCD & Weight Accessories

OTG Scuba Diving Anti Slip Design Trim Weight Pocket can be mounted to any standard (2 inch) webbing waist belt or harness system. It holds up to 2 kgs of solid / hard or shot / soft weight. Also, it is ideal for divers who add weight to tanks for trim purpose. The velcro closure and buckle closure keeps the pocket flap closed more securely. The new anti slip design used a stainless steel belt slide to keep the weight pocket in position.

OTG Scuba Diving Sidemount Stainless Steel Sliding D-Ring is an idea for diver to hold the 12L steel cylinders in place or adjust the perfect trim of AL80 cylinders from the start of dive to the end even the buoyant become positive. This D-Ring can be easily adjusted during the dive. This D-Ring is made by 304 marine grade stainless steel and fit for any standard 2-inch harness. The size is approx. 66mm(L) x 41mm(H) x 3mm(thickness).

****Please check the following details before purchase: Because of the friction between the bungee and harness, divers must check the bungee often and exchange a new one when damaged.****

OTG Scuba Diving Offset Stainless Steel Rigid D-Ring is for divers to attach to any 2-inch standard webbing of the shoulder harness and extend out from behind rebreather counterlungs for easier attachmnet of bailout bottles. It is also an ideal for sidemount divers to attaching tank bungees. This D-Ring is made by 304 marine grade stainless steel and fit for any standard 2-inch webbing / harness. The size is approx. 97mm(L) x 39mm(W).

OTG Scuba Diving Rubber Loop for Oval Corrugated Hose is for divers to secure their low pressure inflator hose together with the oval shape corrugated hose. This rubber loop is made by durable rubber and the size is approx. 1.2cm wide with 0.16cm wall thickness. The Flat length (not stretched) is approx. 6.6cm. Price is based on 1 pair.

(Please note that this rubber loop is for Oval Shape Corrugated Hose only. It is NOT fit for any 2-inch webbing. If you are looking for rubber loop for 2-inch webbing, we have another loop specific for that. Please check our store accordingly.)

OTG Technical Scuba Diving Tank Band with Stainless Steel Buckle & Anti-Slip Pad - Idea for replacement, Sidemount setting, Single tank Adapter or divers who want to adjust their trim problems of Aluminum cylinders or dry suits. Just use with a weight pocket and mount on the cylinders, it is an easy way to solve the trim problems.

OTG Technical Scuba Diving Stainless Steel Single Tank Adapter with 2 Stainless Steel Buckle Tank Bands - Ideal for divers switch their harness system between double tank and single tank rigs or between backmount and sidemount configurations.

OTG Scuba Diving Standard BCD Wash Hose is for diver to wash the inside of their Buoyancy Compensator to remove the build up of salt crystals and foreign deposits much more easier. This wash hose is fit for the inflator with standard male QD nipple. Just connect the BCD inflator QD nipple to the garden hose and fill about half way with fresh water to fully rinse inside. Then give the BC a good shaking. Invert the BC, drain the water and debris out by depressing the oral inflator button. Please make sure to inflate the BCD and allow to dry before storing. It is a much more easier way to clean up the BCD.

OTG Scuba Diving low pressure hose to Scubapro Air 2 quick disconnect adapter (converter)

OTG Technical Scuba Diving Deluxe Adjustable System Shoulder Pad will protect your exposure suit and provide more comfortable experience when diving. Our shoulder pad is easy setup to your harness system within a minute and no need to uninstall the webbing before setting. Also, this shoulder pad is adjustable. It will fit around shoulder D-Ring and any harness accessories. It is a convenience and comfort shoulder pad for all scuba divers.