BCD & Weight Accessories

OTG Technical Scuba Diving Tank Band with Stainless Steel Buckle & Anti-Slip Pad - Idea for replacement, Sidemount setting, Single tank Adapter or divers who want to adjust their trim problems of Aluminum cylinders or dry suits. Just use with a weight pocket and mount on the cylinders, it is an easy way to solve the trim problems.

OTG Scuba Diving Stainless Steel Quick Release Buckle Tank Bands Set is an idea for divers switch their harness system between double tank and single tank rigs or between backmount and sidemount configurations. The quick release Hinge Buckle is much easier and quicker to change a new tank for your BC. Divers often called the hinge buckle as "ScubaPro" style buckle. The Tank Band includes a sewn in Anti-slip pad and the length of the strap is adjustable. It fit most of the standard cylinders.

OTG Technical Scuba Diving Stainless Steel Single Tank Adapter for Backplate (STA) - Idea for divers switch their harness system between double tank and single tank rigs or between backmount and sidemount configurations.

OTG Technical Scuba Diving Standard Power Inflator fits the 1-inch diameter corrugated rubber hose which found on most tek BC aircells.

OTG Technical Scuba Sidemount Diving Neck Clip Chocker makes clipping the cylinder easier and causes it to lay tighter against your body, reducing dangling and drag. The choker pulls the neck clip tight up against the valve and holds it in a consistent position, perfect clipping sidemount cylinders. The choker goes around the valve and thru the gate to hold it up tight against the neck on the curve if the cylinder so the gate of the clip lays up against the neck of the cylinder.

OTG Technical Scuba Diving Deluxe Adjustable System Shoulder Pad will protect your exposure suit and provide more comfortable experience when diving. Our shoulder pad is easy setup to your harness system within a minute and no need to uninstall the webbing before setting. Also, this shoulder pad is adjustable. It will fit around shoulder D-Ring and any harness accessories. It is a convenience and comfort shoulder pad for all scuba divers.

OTG Scuba Diving low pressure hose to Scubapro Air 2 quick disconnect adapter (converter)

OTG Scuba Diving Standard BCD Wash Hose is for diver to wash the inside of their Buoyancy Compensator to remove the build up of salt crystals and foreign deposits much more easier. This wash hose is fit for the inflator with standard male QD nipple. Just connect the BCD inflator QD nipple to the garden hose and fill about half way with fresh water to fully rinse inside. Then give the BC a good shaking. Invert the BC, drain the water and debris out by depressing the oral inflator button. Please make sure to inflate the BCD and allow to dry before storing. It is a much more easier way to clean up the BCD.

OTG Technical Scuba Diving 2" (50mm) wide Webbing is a real marine grade, sturdy and stiff webbing . Well suited for use in backplate harness and general purpose diving applications.

***Please note that our selling price is based on one meter length. We sell webbing in increments of one meter. For example, if you want continous length of five meter, please order five units.***