Hose

OTG Technical Scuba Diving 6 inch (L) High Pressure Gauge Hose is an idea for Side Mount or Deco Tank setting. Our High Quality HP hose is 7/16 inch male for first stage and 7/16 inch female for SPG / Gauge. Length is measured from end to end of hose, including the fittings and their threads. All of our hoses are 40% Nitrox Ready.

OTG Tank Equalizer Din to Din Transfill Hose is design for divers to transfer high pressure gas to equalize betweeen two scuba cylinders. Our value prices Nitrox Ready transfill hose is (60 inches / 1.5 meters) long with standard DIN fitting on both sides which can fit for both 200 and 300 bar standard Din scuba cylinder valves. The 2 inches pressure gauge provides dual readings in both imperial and metric. The gauge is also covered by rubber boot for better security and the reading range is from 0-5,000 psi (0-350 bars). The material of the Din fitting is marine grade chrome plated brass and the working pressure of the high pressure hose is 5,000psi. It has a bleed screw valve for easy to use and comes with a Din thread plastic protector cap.

OTG Techincal Scuba Diving 22 inch (length) Low Pressure Double Braided Inflator Hose is for divers who prefer a shorter length for their technical style BC wing inflator system. The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is converted to any standard BCD inflator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.

OTG Techincal Scuba Diving 22 inch (length) Low Pressure Double Braided Regulator Hose is for divers who are looking for a high quality LP hose for their necklace style backup regulator. The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is 9/16 inch for standard second stage regulator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.

OTG Techincal Scuba Diving 26 inch (length) Low Pressure Double Braided Regulator Hose is for experienced divers who are looking for a slightly shorter length high quality LP hose for their primary second stage regulator. (Sometimes, the most common regulator hose length 28-30 inch is too long and will cause the hose to "bow out" and create unnecessary drag and tug on the mouth.) The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is 9/16 inch for standard second stage regulator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.

OTG Techincal Scuba Diving 26 inch (length) Low Pressure Double Braided Inflator Hose is for divers who are looking for a high quality inflator hose for their jacket style BCD inflator system. The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is converted to any standard BCD inflator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.

OTG Techincal Scuba Diving 40 inch (length) Low Pressure Double Braided Regulator Hose is for experienced divers who would like to setup a streamlined style for their recreational single tank regulator system. The primary second stage LP hose routed under their arms with the regulator on a 90 or 110 degree swivel adapter, and the necklace style setting will be used for their backup regulator. Also, 40 inch is a common length for sport diving "octopus" configuration. For technical divers, they can use this 40 inch LP hose for their stage and deco regulators. The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is 9/16 inch for standard second stage regulator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.

OTG Techincal Scuba Diving 30 inch (length) Low Pressure Double Braided Inflator Hose is for divers who are looking for a high quality inflator hose for their dry suit inflator system. The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is converted to any standard BCD inflator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.

OTG Techincal Scuba Diving 84 inch (length) Low Pressure Double Braided Regulator Hose is for technical divers who are looking for a high quality LP hose for their (7 feet) long hose regulator setting. The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is 9/16 inch for standard second stage regulator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.