Regulator Accessories

OTG Techincal Scuba Diving 26 inch (length) Low Pressure Double Braided Inflator Hose is for divers who are looking for a high quality inflator hose for their jacket style BCD inflator system. The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is converted to any standard BCD inflator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.

OTG Techincal Scuba Diving 40 inch (length) Low Pressure Double Braided Regulator Hose is for experienced divers who would like to setup a streamlined style for their recreational single tank regulator system. The primary second stage LP hose routed under their arms with the regulator on a 90 or 110 degree swivel adapter, and the necklace style setting will be used for their backup regulator. Also, 40 inch is a common length for sport diving "octopus" configuration. For technical divers, they can use this 40 inch LP hose for their stage and deco regulators. The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is 9/16 inch for standard second stage regulator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.

OTG Techincal Scuba Diving 30 inch (length) Low Pressure Double Braided Inflator Hose is for divers who are looking for a high quality inflator hose for their dry suit inflator system. The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is converted to any standard BCD inflator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.

OTG Techincal Scuba Diving 84 inch (length) Low Pressure Double Braided Regulator Hose is for technical divers who are looking for a high quality LP hose for their (7 feet) long hose regulator setting. The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is 9/16 inch for standard second stage regulator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.

OTG Technical Scuba Diving 300 Bar Din Conversion Kit allow you to change your Yoke style first stage regulator to 300 Bar Din style. Our conversion kit is fit for standard Yoke style first stage regulator which is using the thread size 5/8"-24-UNF. Our conversion kit is made of marine grade chrome plated brass completed with O-ring and filter. Easy to install and EAN 40% ready.

OTG Scuba Diving Male 3/8"-24 to Standard BC Female Adapter is to allow divers to convert their scuba gear. The 3/8-inch male end screws into the second stage LP port or any 3/8-inch female end. The other end of this adapter is a quick disconnect BD female fitting that accepts the standard BC inflator male QD port. This adapter is made by marine chrome plated brass. It comes with Viton O-Ring and is completed 40% Nitrox ready.

OTG Scuba Diving Female 9/16"-18 to Male 3/8"-24 Adapter is to allow divers to connect a LP first stage port to a LP second stage fitting. Essentially performing the same function as a standard LP regulator hose, but without the hose. This adapter is made by marine chrome plated brass and is 40% Nitrox ready. The working pressure is below 200psi and is for low pressure use only.

OTG Scuba Diving Moldable Mouthpiece offers you a great way to get the perfect fit, reduce jaw fatigue and increase comfort during your dives. Just dip the mouthpiece in hot water using the supplied "handle”, then briefly cool and place into your mouth in the proper orientation. Bite down softly for a perfect fit of YOUR bite pattern.

OTG Scuba Diving Moldable Mouthpiece offers you a great way to get the perfect fit, reduce jaw fatigue and increase comfort during your dives. Just dip the mouthpiece in hot water using the supplied "handle”, then briefly cool and place into your mouth in the proper orientation. Bite down softly for a perfect fit of YOUR bite pattern.