Regulator Accessories

OTG Scuba Diving Second Stage Regulator to Scubapro BC Inflator Hose Quick Disconnect Adapter allows you to turn your second stage regulator into a quick disconnect device. Nowadays it is commonly to use with second stage or full face mask system. Just simply install the female end to any standard second stage regulator with 9/16"-18 UNF threads. And the nipple end is fit to connect to Scubapro BC quick disconnect adapter. This adapter is made by Marine Chrome Plated Brass and is completed 40% Nitrox ready. The working pressure is below 200psi and is for low pressure use only.

OTG Tech Scuba Diving 316 Stainless Steel 70mm(L) Swivel Eye Bolt Snap is commonly used with regulators, smaller back-up lights or any accessories that being attached to a BC or harness for stowing. Use this one to setup your long hose primary second stage.

All of our Premium Stainless Steel snaps are made by heavy-duty 316 stainless steel alloy which suitable for marine applications. For long life and ease-of-use, the interior spring is also made of stainless steel alloy. Tips for storage: Please rinse your bolt snap in fresh water after each dive.

OTG Scuba Diving Female 3/8"-24 to Male 1/4" NPT Adapter is for divers to change the first stage end of a regulator hose to 1/4" NPT male threads. This adapter is made by marine chrome plated brass. The working pressure is below 200psi and is for low pressure use only.

OTG Scuba Diving Male 9/16"-18 to Male 1/4" NPT Adapter is for divers to change the second stage end of a regulator hose to 1/4" NPT male threads. This adapter is made by marine chrome plated brass. It come with Viton O-ring and is completed 40% Nitrox ready. The working pressure is below 200psi and is for low pressure use only.

OTG Scuba Diving Silicone Long-Bite Mouthpiece improves regulator comfort on extended dives. Keep one spare with you while your diving trip.

OTG Scuba Diving HP Port Plug is for divers who are looking for a replacement of 7/16"-20 High Pressure port plug for their 1st stage regulator, or who just want to keep one in their save-a-dive kit. Our High pressure port plug is fit for any standard 7/16"-20 UNF female regulator HP port. It also come with Viton O-Ring and is completed 40% Nitrox ready.

OTG Techincal Scuba Diving 22 inch (length) Low Pressure Double Braided Inflator Hose is for divers who prefer a shorter length for their technical style BC wing inflator system. The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is converted to any standard BCD inflator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.

OTG Techincal Scuba Diving 22 inch (length) Low Pressure Double Braided Regulator Hose is for divers who are looking for a high quality LP hose for their necklace style backup regulator. The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is 9/16 inch for standard second stage regulator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.

OTG Techincal Scuba Diving 26 inch (length) Low Pressure Double Braided Regulator Hose is for experienced divers who are looking for a slightly shorter length high quality LP hose for their primary second stage regulator. (Sometimes, the most common regulator hose length 28-30 inch is too long and will cause the hose to "bow out" and create unnecessary drag and tug on the mouth.) The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is 9/16 inch for standard second stage regulator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.