Regulator Accessories

OTG Scuba Diving Rubber Ring Style Octopus Holder is an idea to hold your second stages on the right place where you can easy to reach for and are not dragging along the bottom. This simple and reliable OTG rubber ring octopus holder keeps your regulator second stages securely in place when not needed, yet releases them quickly in response when you need. The rubber ring that encircles the second stage mouthpiece does a great job of holding on to the second stage.

OTG Intermediate Pressure Gauge is for diver to diagnose problems of the 1st stage Regulator. It's often very helpful to know if the IP (Intermediate Pressure) is out-of-range. Just plugs the Gauge into any standard BC low pressure inflator hose, it is easy to use. Most of the modern scuba 1st stage regulator should have an intermediate pressure of about 130 to 142 psi.

OTG Scuba Diving Rubber Ring Style Octopus Holder is an idea to hold your second stages on the right place where you can easy to reach for and are not dragging along the bottom. This simple and reliable OTG rubber ring octopus holder keeps your regulator second stages securely in place when not needed, yet releases them quickly in response when you need. The rubber ring that encircles the second stage mouthpiece does a great job of holding on to the second stage.

The OTG Technical Scuba Diving Delrin Threaded Dust Cap For Din First Stage Regulator is ideal to protects the Din system first stage regulator.

OTG Technical Scuba Diving Silicone Regulator Necklace is an idea for technical divers to keep the back up regulator stowed under the chin for instant availability.

OTG Scuba Diving Rubber Ring Style Octopus Holder is an idea to hold your second stages on the right place where you can easy to reach for and are not dragging along the bottom. This simple and reliable OTG rubber ring octopus holder keeps your regulator second stages securely in place when not needed, yet releases them quickly in response when you need. The rubber ring that encircles the second stage mouthpiece does a great job of holding on to the second stage.

OTG Scuba Diving 360 degree swivel first stage high pressure port adapter

OTG Scuba Diving Second Stage Regulator Quick Disconnect Adapter allows you to turn your second stage regulator into a quick disconnect device. Nowadays it is commonly used with normal second stage or full face mask system. Just simply to install the female end to any standard second stage regulator with 9/16"-18 UNF threads. And the nipple end is fit to connect to any standard BC quick disconnect adapter. This adapter is made by Marine Chrome Plated Brass and is completed 40% Nitrox ready. The working pressure is below 200psi and for low pressure use only.

OTG Technical Scuba Diving Low Pressure Hose Splitter provides the ability to split a single low pressure supply line to service two devices such as BC, drysuit, and second stage regulator.