Regulator Accessories

OTG Scuba Diving HP Port Plug is for divers who are looking for a replacement of 7/16"-20 High Pressure port plug for their 1st stage regulator, or who just want to keep one in their save-a-dive kit. Our High pressure port plug is fit for any standard 7/16"-20 UNF female regulator HP port. It also come with Viton O-Ring and is completed 40% Nitrox ready.

OTG Techincal Scuba Diving 22 inch (length) Low Pressure Double Braided Inflator Hose is for divers who prefer a shorter length for their technical style BC wing inflator system. The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is converted to any standard BCD inflator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.

OTG Techincal Scuba Diving 22 inch (length) Low Pressure Double Braided Regulator Hose is for divers who are looking for a high quality LP hose for their necklace style backup regulator. The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is 9/16 inch for standard second stage regulator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.

OTG Techincal Scuba Diving 26 inch (length) Low Pressure Double Braided Regulator Hose is for experienced divers who are looking for a slightly shorter length high quality LP hose for their primary second stage regulator. (Sometimes, the most common regulator hose length 28-30 inch is too long and will cause the hose to "bow out" and create unnecessary drag and tug on the mouth.) The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is 9/16 inch for standard second stage regulator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.

OTG Techincal Scuba Diving 26 inch (length) Low Pressure Double Braided Inflator Hose is for divers who are looking for a high quality inflator hose for their jacket style BCD inflator system. The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is converted to any standard BCD inflator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.

OTG Techincal Scuba Diving 40 inch (length) Low Pressure Double Braided Regulator Hose is for experienced divers who would like to setup a streamlined style for their recreational single tank regulator system. The primary second stage LP hose routed under their arms with the regulator on a 90 or 110 degree swivel adapter, and the necklace style setting will be used for their backup regulator. Also, 40 inch is a common length for sport diving "octopus" configuration. For technical divers, they can use this 40 inch LP hose for their stage and deco regulators. The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is 9/16 inch for standard second stage regulator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.

OTG Techincal Scuba Diving 30 inch (length) Low Pressure Double Braided Inflator Hose is for divers who are looking for a high quality inflator hose for their dry suit inflator system. The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is converted to any standard BCD inflator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.

OTG Techincal Scuba Diving 84 inch (length) Low Pressure Double Braided Regulator Hose is for technical divers who are looking for a high quality LP hose for their (7 feet) long hose regulator setting. The male end of this high quality inflator hose is 3/8 inch for first stage and the female end is 9/16 inch for standard second stage regulator. Length is measured from end to end of hose, including fittings and their threads. All of our hoses are 40% Nitrox Ready.

OTG Technical Scuba Diving 300 Bar Din Conversion Kit allow you to change your Yoke style first stage regulator to 300 Bar Din style. Our conversion kit is fit for standard Yoke style first stage regulator which is using the thread size 5/8"-24-UNF. Our conversion kit is made of marine grade chrome plated brass completed with O-ring and filter. Easy to install and EAN 40% ready.