Tank Accessories

OTG Technical Scuba Diving 1.25 inch long Stainless Steel Bolts Wing Nuts Kit is for divers who are looking for a replacement of 5/16"-18 x 1.25" bolts kit for their STA or just want to keep a pair in their save-a-dive kit. Our Stainless Steel Bolts Kit are made of heavy-dut 316 marine grade stainless steel. This bolts kit also come with plastic lock washers which is easier to keep the bolts in place while setup the gear.

OTG Technical Scuba Diving Stainless Steel Single Tank Adapter with 2 Stainless Steel Buckle Tank Bands - Ideal for divers switch their harness system between double tank and single tank rigs or between backmount and sidemount configurations.

OTG Technical Scuba Diving Din To Yoke Cylinder Filling Adapter is for 200 / 300 Bar Din valve to filling with a standard Yoke filler up to 3,000 psi (200 bars). Just bring this adapter with you wherever you go, you can fill your Din cylinder from any dive operator even they only can fill the Yoke valve cylinder.

OTG Scuba Diving Tank Band Anti-Slip Pad provides a sturdy cushion that keeps your cylinder strap secure and your tank in place once clamped down. This pad is designed to accept most 2-inch nylon webbing and is compatible with multiple brands of tank bands. The pad has 2 slots at each end for the webbing to thread through.

OTG Technical Scuba Sidemount Diving Neck Clip Chocker makes clipping the cylinder easier and causes it to lay tighter against your body, reducing dangling and drag. The choker pulls the neck clip tight up against the valve and holds it in a consistent position, perfect clipping sidemount cylinders. The choker goes around the valve and thru the gate to hold it up tight against the neck on the curve if the cylinder so the gate of the clip lays up against the neck of the cylinder.

OTG Scuba Diving Cylinder Carry Handle is for the diver to transport their cylinder much easier and comfortable. This carry handle is made by sturdy nylon plastic and with foldable design. Divers can folds down the handle when it is not in use. It fits for cylinder neck diameter from 39mm to 41mm.

OTG Scuba Diving Tank Band with Stainless Steel Quick Release Hinge Buckle is much easier and quicker to change a new tank for your BC. Divers often called the hinge buckle as "ScubaPro" style buckle. The 2 inch width heavy duty nylon webbing has a stainless steel hoop and buckle feature that allows complete separation of the buckle from the opposite end of the strap. You no need to lift the BC over the tank and jiggle the strap when you remove or replace the tank. The Tank Band includes a sewn in Anti-slip pad and the length of the strap is adjustable. It fit most of the standard cylinders.

OTG Technical Scuba Diving Tank Band with Delrin Buckle & Anti-Slip Pad - Idea for replacement, Sidemount setting, Single tank Adapter or divers who want to adjust their trim problems of Aluminum cylinders or dry suits. Just use with a weight pocket and mount on the cylinders, it is an easy way to solve the trim problems.

OTG Technical Scuba Diving Stainless Steel Single Tank Adapter with 2 Delrin Buckle Tank Bands - Idea for divers switch their harness system between double tank and single tank rigs or between backmount and sidemount configurations.