Tool

OTG Scuba Diving Handwheel Tool is a high quality driver that makes it easy to remove and re-install SCUBA valve handwheel nuts.

OTG Scuba Diving Digital Differential Pressure Gauge is for divers to check and setup the cracking effort (inhalation effort) of the 2nd stages regulator. The measure range is from -55.40 inH2O to +55.40 inH2O and the resolution is 0.01 inH2O. Also, this gauge have totally 11 units which can be select such as inH2O, psi, bar, mbar, kpa, inHg, mmhg, ozin, ftH2O, cmH2O etc... It is an easy operation and clear reading gauge for every technician.

OTG Scuba Diving Tire Inflator can be connected to your standard BC inflator hose and let you pump things up using your first stage regulator and the air in your scuba tank. With this tire inflator, you can inflate tires, or anything else with a schrader valve stem. No-leak washers provide a secure fit to the stem and the end is offset to help manage the hose during inflation. This tire inflator is made by Marine Chrome Plated Brass for corrosion resistant use.

OTG Scuba Diving High Pressure Seat Extractor Tool can be used for extracting and installing the high pressure seats in first stage regulator. It can also be used to push out the soft seat located inside the piston of unbalanced piston first stage. The overall length (included the shaft) of this tool is 140mm and the length of the shaft is 40mm.

OTG Scuba Diving BCD Hose Schrader Valve Stem is for divers to replace their BC inflator hose schrader valve stem. Keep one with you and it is a Save-A-Dive kit.

OTG Scuba Diving First Stage Regulator Cup Pin Spanner Wrench Service Tool is commonly used for the removal and installation of the high pressure seat retainer on the first stage regulator. This cup wrench tool is adjustable and the adjust range is up to 58mm between pin to pin. The pin size of this tool is 2.75mm and the total length of the tool is approx. 6.25 inches.

OTG Scuba Diving Power Inflator Service Tool has three openings which allow divers to service their power inflator much more easier. This tool fits for the power inflator which found on most Technical BC wings. It's also included the handwheel nut driver used to service the scuba tank valves. Please note that this service tool is not work for Scubapro, Aqualung, Mares, Cressi inflator etc... Please check the size details from our product photos in order to compare with your power inflator.

OTG Scuba Diving Hose Protector Install Hand Tool is for the diver to install their hose protector much easier. This tool comes with 2 threaded adapters which is fit for both standard 3/8" low pressure and standard 7/16" high pressure hoses. A little tip for the easiest way to install the hose protector is to pull them into the hot water before installation. This enables the material of the protector become pliable and easier to slide with the tool.

The OTG Scuba Diving Mini Size Compact Multi Tool features stainless steel tools within a very compact metal housing. This is a premium quality tool that includes eight of the most commonly needed Scuba repair tools, including a variety of hex keys, screwdrivers, a brass o-ring pick, and even a Schrader valve tool.