Tool

OTG Scuba Diving Viton O-Rings are oxygen compatible and 90-durometer. They include 14 most common o-rings sizes and exact suitable for the scuba diving equipment. Each size o-ring consists of 10 pieces. This kit comes with 3pcs. Brass o-ring pick up tool and packed in a plastic box with compartments together with o-rings. It is a must have item for every Nitrox and Deco divers.

OTG Scuba Diving Weight Plate With Multi Function Easy Tool is an easy and simply way for divers to install their weight to any 2 inch webbing. Also, there is not need to remove any hardware or accessories (such as weight buckle, cutter, keeper or ring etc...) when you install this plate. This tool also comes with a multi function which can service for most standard HP hose connector, LP hose connector, BC connector and power inflator hose connector. Easy to install and multi function, it is a must-have accessory for travel trip and every divers.

OTG Scuba Diving BCD Hose Schrader Valve Stem is for divers to replace their BC inflator hose schrader valve stem. Keep one with you and it is a Save-A-Dive kit.

OTG Scuba Diving High Pressure Seat Extractor Tool can be used for extracting and installing the high pressure seats in first stage regulator. It can also be used to push out the soft seat located inside the piston of unbalanced piston first stage. The overall length (included the shaft) of this tool is 140mm and the length of the shaft is 40mm.

OTG Scuba Diving Tire Inflator can be connected to your standard BC inflator hose and let you pump things up using your first stage regulator and the air in your scuba tank. With this tire inflator, you can inflate tires, or anything else with a schrader valve stem. No-leak washers provide a secure fit to the stem and the end is offset to help manage the hose during inflation. This tire inflator is made by Marine Chrome Plated Brass for corrosion resistant use.

OTG Scuba Diving Digital Differential Pressure Gauge is for divers to check and setup the cracking effort (inhalation effort) of the 2nd stages regulator. The measure range is from -55.40 inH2O to +55.40 inH2O and the resolution is 0.01 inH2O. Also, this gauge have totally 11 units which can be select such as inH2O, psi, bar, mbar, kpa, inHg, mmhg, ozin, ftH2O, cmH2O etc... It is an easy operation and clear reading gauge for every technician.

OTG Scuba Diving Handwheel Tool is a high quality driver that makes it easy to remove and re-install SCUBA valve handwheel nuts.

OTG Scuba Diving Air Nozzle is for divers to blow dry their equipments just like air gun or to inflate their marking buoys or other beach toys. Normally the air nozzle is closed, just simply depress the side of the rubber head to release the compressed air from the scuba tank. This air nozzle is made by marine chrome plated brass and durable rubber. It is easy to use and connect to standard inflator hose.

OTG Scuba Diving Air Nozzle is for divers to blow dry their equipments just like air gun or to inflate their marking buoys or other beach toys. Normally the air nozzle is closed, just simply depress the side of the rubber head to release the compressed air from the scuba tank. This air nozzle is made by marine chrome plated brass and durable rubber. It is easy to use and connect to Scubapro Air 2 inflator hose.