Tool

OTG Scuba Diving Weight Plate With Multi Function Easy Tool is an easy and simply way for divers to install their weight to any 2 inch webbing. Also, there is not need to remove any hardware or accessories (such as weight buckle, cutter, keeper or ring etc...) when you install this plate. This tool also comes with a multi function which can service for most standard HP hose connector, LP hose connector, BC connector and power inflator hose connector. Easy to install and multi function, it is a must-have accessory for travel trip and every divers.

OTG Scuba Diving Power Inflator Service Tool has three openings which allow divers to service their power inflator much more easier. This tool fits for the power inflator which found on most Technical BC wings. It's also included the handwheel nut driver used to service the scuba tank valves. Please note that this service tool is not work for Scubapro, Aqualung, Mares, Cressi inflator etc... Please check the size details from our product photos in order to compare with your power inflator.

OTG Scuba Diving First Stage Regulator Cup Pin Spanner Wrench Service Tool is commonly used for the removal and installation of the high pressure seat retainer on the first stage regulator. This cup wrench tool is adjustable and the adjust range is up to 58mm between pin to pin. The pin size of this tool is 2.75mm and the total length of the tool is approx. 6.25 inches.

OTG Scuba Diving First Stage Regulator Holder Handle Bar has both 3/8"-24 and 7/16"-20 male threaded end to allow threading into the LP or HP ports of the first stage regulator body. It is much more easy and stable to hold your first stage while servicing.

OTG Scuba Diving First Stage Regulator Yoke Large Nuts Removal Service Tool is used for the removal and installation of the yoke large nuts on the first stage regulator. This service tool is fit for most common size yoke large nuts including 19mm, 21mm, 25.4mm and 26mm (diameter of yoke large nuts). The material of the tool is heavy duty 7075 aluminum alloy. It is lightweight but durable.

OTG Scuba Diving Handwheel Tool is a high quality driver that makes it easy to remove and install the schrader valve stem from the inflator hoses or even for your car and bicycle tires.

OTG Scuba Diving Air Nozzle is for divers to blow dry their equipments just like air gun or to inflate their marking buoys or other beach toys. Normally the air nozzle is closed, just simply depress the side of the rubber head to release the compressed air from the scuba tank. This air nozzle is made by marine chrome plated brass and durable rubber. It is easy to use and connect to Scubapro Air 2 inflator hose.

OTG Scuba Diving Air Nozzle is for divers to blow dry their equipments just like air gun or to inflate their marking buoys or other beach toys. Normally the air nozzle is closed, just simply depress the side of the rubber head to release the compressed air from the scuba tank. This air nozzle is made by marine chrome plated brass and durable rubber. It is easy to use and connect to standard inflator hose.

OTG Scuba Diving Handwheel Tool is a high quality driver that makes it easy to remove and re-install SCUBA valve handwheel nuts.